The post How To Get Hair Dye Out Of Carpet appeared first on Maid2Match.
]]>However, it’s pretty easy to make a mess while colouring your hair. The dye can get in all sorts of places, from the mirror to the carpet.
How to get hair dye out of carpet? You can try some of these solutions:
For deep-set or old dye stains, use a longer vinegar soak or an ammonia-based cleaning solution.
Afterwards, make sure to wash any remaining dye and cleaning product out of the fibres. Then let the carpet air dry.
Yes – with some elbow grease. There are several solutions, but you’ll need to be patient and thorough when cleaning.
Sometimes, though, the stains will stick – especially if the dye is old or a very vivid/dark colour.
Different carpet fibres have different cleaning solutions. Synthetic carpets (such as nylon or polyester) are more durable and easy to clean.
On the other hand, leather and natural fibres (like wool or silk) are more sensitive and may require specialised cleaners. It may be best to take them to a cleaning professional.
There are several types of hair dye available depending on your colour needs.
Note that permanent, semi-permanent, and demi-permanent dyes will be the most difficult to remove from carpet fibres.
This type contains oxidising agents like ammonia, and causes the hair to undergo chemical processes.
It lasts incredibly long and may fade, but never really be “stripped” from your hair for several months. You’ll still have to retouch or reapply dye every 4-6 weeks.
These dyes don’t contain ammonia – instead, they work by depositing colour on top of the hair cuticles. Henna is a form of semi-permanent dye.
Depending on whether you’ve bleached your hair or not, the colour will last around 4-12 washes.
People usually prefer demi-permanent dyes to cover greying hair. They don’t contain ammonia, and are less chemically harsh than permanent dyes.
You typically have to mix demi-permanent dyes with a developer. This will help the colour penetrate your hair shaft, letting it last longer.
There are also temporary dyes – they’re not meant to last more than a day. One form is shampoo-on dye, which you can simply shampoo into your hair. It will deposit some colour on your hair shafts.
Spray dyes or chalk dyes are even more temporary, and are usually used for parties or performances. They’ll come out immediately after a shower.
Hair dye stains are tough – they’re meant to deposit chemical colours for long periods of time, after all.
It’s best to prep before tackling a dye stain.
Use a spoon, dull knife, or plastic card to remove any liquid clumps or partially-dried dye from the fibres.
Be careful while scraping so you don’t push the dye in deeper. You can also use a paper towel or clean cloth to blot any dye off.
Test your cleaning method on an inconspicuous area first to make sure it doesn’t do damage!
Black and red hair dyes are notoriously harder to remove, since they’re “stronger” colours.
The best methods for getting black hair dye out of carpet include rubbing alcohol or hydrogen peroxide. It’s the same for red dye stains.
Will acetone remove hair dye from carpet? Yes, but it’s very harsh, it can destroy or discolour the fibres.
You can opt for an acetone-free nail polish remover instead. Use it in the same way as rubbing alcohol.
Do not use bleach-based products when cleaning hair dye off a carpet. You’ll damage the fibres and the base underneath.
When cleaning a hair dye spill, try to act quickly. The longer you let the dye sit, the harder it’ll be to remove.
Never rub when cleaning dye stains – that’ll just push the dye further into the fibres.
These cleaning methods will only work for synthetic fibres and other carpets that specifically allow for them. Anything else (especially silk, leather, or wool carpet) is best left to professionals.
This is a quick fix for fresh spills, especially if you already have hair spray handy. It also works to get nail polish out of carpet!
Spray the stained area from a few centimetres away. Blot the stain with a white paper towel or cloth.
Repeat until the hair dye is completely removed. Rinse the area with some cold water afterwards.
One of the best and simplest ways for removing hair dye from carpet is by using white vinegar.
Don’t worry – the vinegar shouldn’t be strong enough to discolour the fibres.
Mix two cups of warm water (or slightly cool water) with one tablespoon white vinegar and one tablespoon dishwashing liquid.
Use a clean cloth or sponge to gently work the cleaning solution into the carpet. Work from the outside in, and be gentle while dabbing.
Wring the cloth or sponge out before cleaning – you’ll want to minimise the wetness on the fibres.
You could also use a spray bottle, but don’t get the carpet too wet.
Follow the vinegar solution with paper towels, blotting frequently until the stain disappears.
NOTE: After the vinegar has dried, you can sprinkle some baking soda onto the carpet to absorb the odours. Let it sit for a few hours, then vacuum the residue with the carpet attachment.
Rubbing alcohol is best for smaller stains or for removing dye traces.
Dip a cotton swab or soak a cotton ball in some rubbing alcohol. Apply to the hair dye stains, then blot with a paper towel.
Repeat until stain removal is complete.
Never use this method on dark-coloured carpets, as the product could discolour the fibres. It’s better saved for light-coloured or white carpet.
Mix two parts of water with one part 3% hydrogen peroxide. For a more stubborn stain, you can simply apply hydrogen peroxide undiluted.
Use a cotton swab to apply the solution to the stained area. Let the hydrogen peroxide sit for a few hours – or for tough stains, overnight.
Rinse the area with cool water as soon as you see the stain has disappeared. Then use a dry cloth to soak up any excess moisture.
If your carpet is washable, you can try your preferred laundry stain remover.
Follow the package instructions when applying the product to the hair dye stain. Then blot the stain with a paper towel or cloth.
Repeat until the stain has lifted. Try not to spend more than a total of 10 minutes applying the product.
Rinse or steam clean the carpet afterwards.
For old or deep-set hair dye stains, try sprinkling some baking soda onto the stain. Then make the same mixture of two cups of warm water, one tablespoon dish soap, and one tablespoon white vinegar.
This time, instead of a light application, thoroughly apply the mixture to the stain. Let it sit for an hour (or for old dye, overnight).
Afterwards, wipe the carpet with a damp cloth and vacuum up any excess residue.
Another method is using an ammonia solution, but we generally don’t recommend this. Ammonia is a very strong product and can damage the carpet fibres. It could also damage the carpet base, causing the fibres to fall out.
If you’re willing to risk it, mix one tablespoon of ammonia in two cups of warm water. Add a few drops of dish soap. While wearing gloves, use a sponge or clean cloth to apply the solution to the carpet stains.
Let it sit for 30 minutes at most before rinsing with a wet cloth. Then use a dry cloth to absorb excess moisture.
Give your carpet a good wash afterwards to remove any trace stains and cleaner residue.
You can use a mixture of equal parts white vinegar and warm water to lightly saturate the carpet. Alternatively, use your favourite carpet cleaner.
Rinse the carpet thoroughly with lukewarm to cold water.
If your carpet manual says it’s allowable, you can also steam clean a carpet.
Afterwards, let the carpet air dry – either by a window or outdoors in the shade. You can also speed up the process with an electric fan or hair dryer.
Before dyeing your hair, always lay down old newspapers or towels on the floor. These will catch any hair dye spills so you don’t have to clean afterwards.
For dye on other surfaces, such as the bathroom sink or walls, act ASAP. Wipe the stain off with a damp sponge or cloth and some liquid dish soap, then rinse.
Alternatively, scrub the stained area with a paste of baking soda and water. Use a sponge to gently scrub the area with the paste, then rinse after an hour.
(Or call up a reliable home cleaning service near you so they can clean the space for you.)
If the carpet stain has dried but is still recent, try wetting the area to “rehydrate” the dye or make it easier to remove.
When figuring out how to get hair dye out of carpet, never mix cleaning products unless directed. If you’re using an ammonia solution, do not add anything except water or dishwashing detergent.
The post How To Get Hair Dye Out Of Carpet appeared first on Maid2Match.
]]>The post How To Get Wax Out Of Carpet appeared first on Maid2Match.
]]>Oops.
Whether you were trying to add a fairytale touch to a dinner party or the power went out for the night, there’s the risk that the candles will drip onto the carpet. Fortunately, there’s no need to cry over spilled wax.
How to get wax out of carpet? Try one of these methods:
Don’t forget to clean the carpet afterwards. That’ll take care of any stains or discolouration. Then you can go back to enjoying your candlelit evening… with some drip guards or holders for protection!
Before you reach for any cleaning solutions, it’s good to know what type of carpet you own. Certain carpet fibres require specialised cleaning that you may not be able to do on your own.
Carpets made from synthetic fibres like nylon or polyester are much more durable, so they can withstand most cleaning methods.
However, natural fibres (like wool) or leather are more sensitive materials. In these cases, it’s better to reach out to a professional carpet cleaner.
Most common ways to remove candle wax involve temperature – either freezing the wax residue or heating it up.
If the wax gets onto other surfaces (like your floor), a professional house cleaning service can help you out.
You’ll need a butter knife or a similar dull knife to scrape dried wax off carpet fibres. Afterwards, you should clean your carpet to tackle any wax stains or discolouration.
Never rub when you’re trying to remove candle wax. That’ll just push the wax further into the fibres and make it harder to get out.
This method works best if you act ASAP. While the spilled wax is still molten, grab a pack of ice cubes.
An ice pack or even a bag of frozen vegetables (like peas) will work as well.
Wrap the ice pack in a towel or plastic bag so the condensation doesn’t mix with the wax spills. Then place the ice pack onto the wax to freeze it.
Once the spilled candle wax has frozen, use the knife to scrape off as much residue as possible.
Keep working until you’ve gotten all the wax off.
If the wax has already solidified, heat is your best weapon. Grab a hair dryer and set it to medium or high heat.
Hold it a few centimetres away from the spilled wax and move it back and forth. Once the wax begins to soften, blot it with a paper towel.
Try not to hold the hair dryer over the fibres for longer than 30 seconds – the heat could cause the fibres to warp or melt.
Keep going until you’ve gotten all the wax off.
Be careful with this method, since it involves applying direct heat to your carpet. Grab your iron and a terry cloth towel (or a similarly chunky cloth).
Lay the terry cloth towel over the spilled candle wax. (In a pinch, several layered paper towels will work too.) You can dampen the towel a bit, but it’s not necessary.
Turn your iron to a medium-low setting and press it down on the wax stain for 10 seconds. The towel will begin to absorb the melted wax.
Repeat until the remaining wax is removed.
NOTE: Some people say to use a brown paper bag, but a terry cloth towel is better. The paper bag could scorch under the heat of the iron and damage your carpet further.
If you don’t want to risk using heat or ice, there are alternatives to remove wax!
Keep in mind, though, that these methods might not be as effective – or could take more effort to clean candle wax off.
Spot-check the vinegar on your carpet before cleaning – vinegar doesn’t always work well on some materials (especially wool).
Mix equal parts vinegar and warm water in a spray bottle. Lightly saturate the affected area – but don’t get it too wet, since moisture can cause mould or damage.
Let the solution sit for about 30 minutes, then place a paper towel or fresh cloth on top to absorb the wax stain.
You can also use vinegar to remove the remaining wax residue after you’ve used another cleaning method.
If the wax stain is small, try cleaning it with some rubbing alcohol.
Apply a small amount of the alcohol onto the spilled candle wax. Blot the area with a clean white cloth, working from the outer edges then going inwards.
Alternate between alcohol and blotting until all the wax has been removed.
NOTE: This method works well for coloured candle wax. Just make sure to dab, not rub, or you could push the wax further into the carpet fibres!
For small wax drips, you can use a dry-cleaning solvent. Test the product out on an inconspicuous spot first, though!
Blot the affected area with a clean cloth, then apply a small amount of solvent according to instructions.
Gently dab the stain with the cloth to absorb as much wax as possible. Repeat until the remaining residue is removed.
Once the removal process is finished, it’s time to clean your carpet! You can use your preferred carpet cleaner or stain remover.
TIP: Try scrubbing the cleaner into the carpet with a spoon. The dull edges will scrape off any remaining wax.
Dab off any residue with a clean cloth, then let your carpet completely dry.
You can go over the fibres with a carpet vacuum attachment to catch any remaining wax crumbs and fluff the carpet up. Then your carpet should be good as new!
The post How To Get Wax Out Of Carpet appeared first on Maid2Match.
]]>The post How To Get Dog Hair Out Of Carpet appeared first on Maid2Match.
]]>Gosh, do you love your furry friend, but gosh, do they shed.
Thankfully, there are several easy tricks to get dog hair out of carpet! Your chosen method will depend on the carpet material and pile, but these cleaning methods include:
You can also lessen or minimise the amount of loose hair and fur scattered around your home.
However, any good pet owner knows that dog glitter is a gift – just one that gets everywhere, from your jeans to your couch cushions.
Any good dog owner will know that not all dogs shed equally. Some shed more than others (Samoyeds, Pyrenees, Labrador retrievers) while some breeds shed very little (poodles, terriers, schnauzers).
However, not all of us know the difference between dog hair and dog fur. They’re both made up of keratin, but “behave” differently.
Dog fur consists of short, coarse hairs that will grow to a pre-determined length. Many dogs have two layers of fur, called a double coat, which will require de-shedding and not trimming.
Some notable dogs with fur include Golden Retrievers and collies.
Meanwhile, dog hair will keep growing for indefinite periods of time unless trimmed. Think of Poodles and Maltese breeds.
Dogs with fur shed much more, especially during shedding season and for those with double coats. Owners may need to “blow out” the coat to aid the shedding.
In everyday speak, though, we use “hair” and “fur” interchangeably. So for this blog, “dog hair” covers hair and fur – both of which are a pain to get out of carpets!
Yes, it does! Both types of carpet trap pet hair, but it’s harder to remove dog hair from high piles.
The long carpet fibres make it difficult to reach the dirt, so high-pile carpets need more effort to clean.
In general, pet owners are advised to choose low-pile carpets for rooms where pets have access.
There are a few tricks for removing dog hair from a low-pile carpet.
You can combine different methods for a more effective clean.
This is a classic in pet hair removal, and probably the easiest method to remove dog hair. Lint rollers work on upholstery, clothes, and yes, carpets!
You can even get large lint rollers, such as the Scotch-Brite Pet Large Surface Roller. It’s 23.7cm wide and comes with 60 sheets of extra-sticky adhesive made specifically for pet hair.
Simply run the lint roller back and forth across the carpet. When the sticky sheet is completely covered or is no longer sticky, remove it to expose a new layer.
TIP: If you’ve run out of lint roller sheets, duct tape will work in a pinch.
If you have a hairbrush with stiff metal bristles, you can use it on small sections of carpet. It works best for carpets with thick and/or long fibres.
Use both short and long strokes going in one direction. The bristles will extract dog hair from the fibres and pull it towards a “collection point” where you can pick it off.
However, your dog’s hair will periodically clog the bristles. Pull the dog hair off the bristles, then resume brushing until no more fur remains.
This is an old but gold trick for removing dog hair from your carpet! Rubber gloves will generate static electricity, which will attract the dog hair and make it stick to the surface.
Wear the rubber glove and rub your hand all over the carpet fibres. The friction will create static, which will lift dog hair off (alongside lint and other debris).
This trick will also work with damp rubber gloves, although make sure to minimise moisture so it doesn’t soak into the fibres.
Rinse off the gloves afterwards in a bucket of hot water, not in the sink. The hair will clog your drain and that’s a whole new problem!
NOTE: This trick also works with thin latex gloves, although they may be more prone to tearing.
You may hear about a “dog hair magnet” and think, well dog hair isn’t magnetic. But these hair magnets aren’t actually that – they’re rubber squeegees!
A regular household rubber squeegee will work, but some brands have pet-specific models such as the Mr. Siga Rubber Broom with Built-In Squeegee.
Push or pull the squeegee along the carpet lightly, in one direction. Don’t exert too much pressure or you could pull out the fibres instead.
You’ll end up with clumps of dog hair and other debris. Repeat the process until you’ve gotten all the fur out.
Be careful with this method! If you need to clean a shag rug, for example, the ones made of wool or leather cannot be cleaned with fabric softener.
But if your carpet’s material is washable, you should be fine.
Fabric softener works well to remove dog hair that’s stuck to fibres. Mix 1 part fabric softener with 3 parts water in a spray bottle.
Lightly spray the carpet, taking care not to over-saturate the fibres. You just want a light mist to dampen the surface.
Wait for the solution to dry, then use a vacuum cleaner or brush to remove pet hair.
High-pile carpets are a bit trickier since the long fibres trap pet hair so it’s hard to get to.
You’ll also need to be more careful so you don’t accidentally snag or tangle the piles.
These tools are designed especially for carpets, so they can dig into the fibres. Your usual carpet rake will have metal tines, although you can also opt for ones with rubber bristles.
Secure the head and extend the handle to a comfortable position. Then pull the rake across the carpet, applying light pressure. For particularly furry spots, use short and firm strokes.
Remove the fur from the bristles at intervals to prevent clogging.
If you have a long-bristled dog brush, it’ll also work on a high-pile carpet! These brushes are excellent for reaching deep into fur or fibres to pull out hair from carpets.
Use a mix of short and long strokes, and work in one direction. Pull the hair off the dog brush after you’ve finished one section of carpet, then move to the next part.
The baking soda method works best in tandem with a vacuum cleaner. It’ll help loosen pet hair from the fibres while absorbing any odours.
Sprinkle a light layer of baking soda onto the carpet fibres. Let it sit for a few minutes so you can easily vacuum the debris and fur afterwards.
Among the top vacuum cleaners available in Australia, your best bet for a pet vacuum cleaner is the Miele Complete C3 Cat & Dog Vacuum.
This model is specifically designed for pet owners, since it picks up even stubborn pet hair and dander. It can even remove odours from surfaces as the filters contain charcoal.
The Miele C3 also comes with a large-capacity dustbag and a Turbobrush that removes hair from your carpet without pulling the threads.
A more affordable cordless alternative is the Samsung Jet™ 60 Pet Vacuum. This vacuum cleaner is lightweight and manoeuvrable, and can pick up pet dander with ease.
If you already have a regular vacuum cleaner, check if you can purchase a carpet attachment.
Car carpets are more hard-wearing than the ones in your home, so they’re easier to clean.
You can use a lint roller or rubber gloves to remove dog hair from car carpet. The same approach also works for cleaning car upholstery.
You can also opt to replace your car carpets with rubber mats.
The best way to minimise pet hair on your carpet is by regularly grooming your dog! Brush your dog’s coat every few days regardless of fur length.
For double-coated dogs, you’ll need to de-shed or blow out your dog’s coat twice a year during shedding season (spring and fall).
You can also protect the whole carpet with an anti-static spray. When the fibres of a carpet rub together, they create a static charge that attracts dog hair and makes it stick. The spray will prevent that from happening.
Additionally, it’s important that you vacuum the carpet and floors around once a day, or at least once every few days. This will lessen the amount of fur floating around, which could accumulate in the carpet piles.
(Of course, a regular house cleaner can help you stay on top of that.)
Pets are an investment, no two ways about it. A lot of effort goes into caring for them, and that includes tidying up their messes.
So yes, that includes knowing how to get dog hair out of carpet… and your clothes, couches, and counters, too. There is no escape!
The post How To Get Dog Hair Out Of Carpet appeared first on Maid2Match.
]]>The post How To Get Nail Polish Off Carpet appeared first on Maid2Match.
]]>Or not.
Worry not – you can remove nail polish stains from a carpet. Use a nail polish remover such as hair spray and rubbing alcohol, acetone-free polish remover, white vinegar, or hydrogen peroxide. Blot the stain first (don’t rub!), then take a soft cloth or paper towels dipped in your chosen cleaning solution. Clean the carpet afterwards.
Accidents happen, so there’s no need to panic. If you experience a nail polish spill, here’s how to get nail polish off carpet.
Yes, it does. Your stain removal method will depend on the type of carpet fibres and the colour of your carpet.
Avoid acidic cleaners if you have a dark carpet, since this could cause discolouration. Meanwhile, if your carpet is dry-clean only, you may need to leave the cleaning to the professionals.
(BTW – besides your carpet, are you cleaning the rest of your living room? If not, an expert cleaning team can help you there!)
For fresh nail polish spills, it’s essential to act quickly. Removing dried nail polish is harder, although not impossible (we’ll teach you that too).
You can redo your nails later – right now it’s important to get that fingernail polish out of carpet, ASAP.
Start by scooping or blotting excess polish from the carpet fibres. You can use a spoon or butter knife and wipe it off on a paper towel in between scoops. Remove as much nail polish as possible.
Take an old towel or paper towel and gently blot the nail polish stain. Don’t rub – that’ll drive the stain in deeper.
Instead, fold the towel over and dab using one spot at a time, changing to a new area of cloth after each dab.
Check to see how much nail polish the towel absorbs each time. When there’s barely any colour staining, the stain is almost clean.
You have a range of choices to remove nail polish, depending on the colour of your carpet. But two things to avoid are acetone and bleach, since these can damage and discolour the carpet fibres.
To remove nail polish from carpet, try one of the following:
Again, if your rug has a dark colour, do not use acidic cleaners. On the other hand, hydrogen peroxide is excellent for light carpets. Always patch test first before starting to clean.
Some people may recommend window cleaner, but we feel it’s better to avoid this since it could be harsh on your carpet and your nose.
Dip a clean cloth in your chosen carpet cleaner, or spray it on carefully.
Again, gently dab the stain, changing sections each time. Reapply your carpet cleaning solution as necessary.
You can combine hair spray and rubbing alcohol as well for a more effective solution. Just spritz hair spray on, then follow with a dab of alcohol.
Keep going until the stain has lifted out of the carpet completely.
Lastly, use a clean section of cloth or more paper towels to absorb any remaining residue from the cleaning liquid. You can opt to clean and refresh your carpet afterwards.
Removing a dried nail polish stain is more difficult, but not impossible. It’ll just need a bit more effort and elbow grease.
Use a dull knife or rubber blade to scrape at the fingernail polish. Work in the same direction as the carpet fibres so you don’t tug any out or otherwise damage them.
You can use scissors to snip off small bits of fibre for tough stains, but do note that this could create a noticeable patch on your carpet.
Take a vacuum with an upholstery attachment and vacuum any loose flecks and pieces of polish out of the carpet.
Again, test your chosen polish remover on a small area to ensure it won’t damage the carpet fibres.
Dab a cloth repeatedly on the area to lightly apply your nail polish remover. Change sections of cloth and apply more carpet cleaner as you go. Repeat until the stain has lifted.
If a stain is particularly stubborn, you can try using a small scrub brush to gently scrub the area.
Once you’ve removed the nail polish stain, you can clean the carpet to restore its look. This doesn’t mean cleaning the whole thing, though – just the affected area!
Fill a bowl with warm water and a few drops of dish soap or liquid carpet cleaner. Mix well.
Take a clean sponge and dip it in the water, then wring out the excess liquid so it’s only damp.
Wipe the previously-stained carpet area to remove any leftover residue. This will help remove any remaining polish and the scent of your cleaner.
Once that’s done, empty the bowl and refill it with clean water. Use a cloth or a different sponge to rinse the area.
Lastly, dry the carpet to avoid mould or mildew developing due to excess moisture. Pat the area dry with a clean towel.
You can turn on an electric fan to speed up the process. Never use a hairdryer since the heat could damage the fibres and backing.
And that’s it for how to get nail polish off carpet. Next time you’re having a spa day at home and accidentally spill your polish, don’t panic.
But maybe spread some newspapers or cardboard to avoid stains in the first place – just a tip!
The post How To Get Nail Polish Off Carpet appeared first on Maid2Match.
]]>The post How To Get Makeup Out Of Carpet appeared first on Maid2Match.
]]>Oops!
How to get makeup out of carpet? Your cleaning method will depend on the type of makeup stain.
Always start by scraping and blotting away as much makeup as possible.
A foundation stain will need dish soap and cold water, while liquid eyeliner can be cleaned with vinegar. You can get lipstick out with degreaser. Eyeshadow and blush can be cleaned with a soap mixture. And of course, use an oil-free makeup remover for mascara.
It’s as simple as that. There’s no need to panic about makeup stains on carpet… unless it was limited edition – darn it!
Short answer: yes! If you act quickly so the makeup doesn’t set into the carpet fibres, then you can remove makeup stains easily.
Use the appropriate cleaning agent and don’t rub the stain – it’ll be harder to clean and might spread.
It’s also essential that you don’t use coloured or dyed cloth when wiping makeup stains. The colour from the cloth could transfer onto the fibres, which will be more difficult to remove.
Knocked over a bottle of foundation? Dropped your mascara wand? Don’t panic.
Always start by using a clean cloth or paper towel to remove excess makeup from carpet. Gently blot, don’t rub!
You can also carefully pick up any blobs or gunk from the fibres. Get as much out as you can – the less you need to clean, the better.
An eyeliner pencil won’t pose any problems, but liquid liner? That’s a different problem. To get eyeliner out of carpet, you’ll need:
Start by mixing a tablespoon of vinegar in half a cup of warm water. Lightly dampen a white cloth with the solution, then use it to blot the stain. Work from the outside in so you don’t spread the eyeliner.
Keep working until there’s no more eyeliner left. Then get a fresh cloth dipped in plain water to blot up any remaining vinegar solution.
This will depend on whether you’ve dropped bullet or liquid lipstick. Bullet lipstick is usually fat- or oil-based, so you’ll need something to break that down:
Pick out any solid bits of lipstick using a paper towel. Try your best not to push the clumps into the fibres.
Degreasers are strong products, so you can dilute them with a little water. Test the cleaning solution on an inconspicuous area to check that it doesn’t cause discolouration or damage.
Dab on the degreaser mix and let it sit for 5 minutes. Use a fresh microfiber cloth dipped in clean water to clean up any residue.
Liquid lipstick stains in a different way than bullet lipstick, since it can seep into fibres. To clean up liquid lipstick stains, you’ll need:
Pre-treat the stain with a solution of 1 teaspoon enzyme detergent mixed with a cup of water. Let it soak for 3–5 minutes.
Take a fresh microfiber cloth dipped in clean water and use it to rinse off the detergent residue.
Then apply some white vinegar to the stained area using a cloth or sponge. Let it sit for a minute, then rinse it with another damp cloth.
Gently blot the area dry. Leave the carpet to air out overnight.
If you’ve accidentally squirted out liquid foundation or dropped your cream cushion on carpet, act fast! You’ll need:
Start by scraping up as much excess foundation as you can using the dull knife or spoon. Be mindful not to push the substance further into the carpet.
Mix a tablespoon of dish soap into two cups of cold water and stir well. Drip a white cloth into the solution and wring it out.
Dab at the stain to remove it, working from the outside in. You can use small circular motions if needed. Blot until there’s no more colour transfer.
Dip a second cloth into plain water and use it to rinse the area. Repeat if necessary, then use a fresh microfiber cloth to dry the area.
This is a bit tricky, since mascara dries fast and clumpy. It’s a good idea to keep eye makeup remover handy – it works on more than just your lashes!
Apply the makeup remover to the cloth – not directly onto the carpet.
Dab at the mascara until all of it has lifted from the fibres. Reapply to a clean spot on the cloth and repeat as necessary.
Dry the area with a new cloth once it’s clean.
This includes eyeshadows, powder foundation, blush, and other things that come in powder form. These tend not to stain as badly as liquid makeup, although they can leave some colour residue.
Start by vacuuming to remove as much of the powder as possible. Use the upholstery attachment so you don’t damage the carpet and spread the stain.
Spray the affected area with shaving foam. The foamy shaving cream is essentially aerated soap, which will break down the stain.
Take a moist microfiber cloth and work the foam into the stain using circular motions.
Dab the area with a damp towel to rinse. You can repeat as needed until the entire stain has lifted.
You can – for lighter carpets. Hydrogen peroxide causes bleaching and discolouration, so if you use it on coloured fabrics, you’ll end up with a pale blotch.
Even for lighter carpets, test the hydrogen peroxide on an inconspicuous spot first. Then apply a few drops directly onto the stain. Dab to help it spread, but don’t rub. Let it sit for a minute.
Dampen a clean cloth with water and use it to rinse the area. Then take a new cloth to gently pat dry.
If you didn’t notice a makeup stain and it dried up, you’ll need to put in some extra work to remove the tough stains.
You can “rehydrate” a dry stain by pre-soaking it in a teaspoon of enzyme laundry detergent mixed in a cup of warm water.
Let the solution sit for 3–5 minutes, then rinse it with a sponge dampened with water. Choose the appropriate stain remover afterwards.
Do not use paint remover or nail polish remover to remove makeup stains from carpet. Unless you’ve thoroughly tested the product, these could damage the fibres.
If the stain persists despite your best efforts, it’s probably time to have it professionally cleaned.
Act quickly to remove makeup stains from other surfaces in your bedroom as well! Maybe something splotched on the dresser, or a little one got creative with the lipstick.
Alternatively, you can leave it to a qualified home cleaner to do the job.
Be mindful when using makeup products, especially if you’re in a hurry! It pays to know how to get makeup out of carpet, but hopefully, you won’t need to actually do it – that MAC lippie could be irreplaceable.
The post How To Get Makeup Out Of Carpet appeared first on Maid2Match.
]]>The post How To Get Gum Out Of Carpet appeared first on Maid2Match.
]]>So, how to get gum out of carpet? There are five common ways:
Afterwards, you may need to remove gum stains or gum residue as well.
If you get gum on the carpet, don’t panic. You can try a carpet cleaning solution before resorting to hiring a professional carpet cleaner. Remove chewing gum from carpet with these easy methods – accidents happen, after all!
Whether a kid got a little naughty or someone accidentally dropped some in the living room, gum on your carpet is a pain. Use one of these methods of gum removal – or combine them for extra cleaning power.
Before anything else, know that trying warm water won’t work. Chewing gum is hydrophobic, so water won’t dissolve it. You’ll just end up with wet carpet!
Use a freezer pack or some ice cubes in a plastic bag to freeze gum on the carpet fibres. Then use a butter knife, dull knife, or other scraping tool to remove frozen gum from the carpet – as much gum as you can. Repeat until all the gum is removed.
Don’t forget to dry the carpet once you’re done! Use a clean cloth to blot the area, or simply let the carpet air dry.
NOTE: The ice cube method is particularly useful for removing old black gum.
Get a hairdryer and put it on the medium heat setting. Aim it at the hardened gum, being careful not to damage the fibres. Then cover your hand with a plastic bag before picking out the softened gum.
If there’s remaining gum residue, carefully blot it with a citrus cleaner such as lemon juice. Then use a cloth to dry any excess moisture.
One other trick for removing gum is the vinegar method. Heat up a quarter cup of white vinegar in the microwave – but don’t let it boil. Then dip a clean rag in the vinegar, and use it to dab and saturate the gum.
Then use a butter knife or dull knife as a gum remover and scrape the sticky substance off.
For any residue, take a soft-bristled brush or old toothbrush and gently rub it on the affected area. The gum will stick to the bristles (so use a brush you can toss out afterwards).
NOTE: Before applying white vinegar to your carpet, test it on an inconspicuous area! Vinegar could damage the natural fibres of your carpet, so if this cleaning method isn’t viable, just choose one of the others.
Just like vinegar, you can use rubbing alcohol or methyl salicylate to loosen and remove gum from the carpet. Apply a few drops of either liquid onto the gum and let it sit for 5–10 minutes. Then take some paper towels and gently pick the gum off the fibres.
A lot of us want to avoid using harsh chemicals to clean our homes, but sometimes we need that extra kick. You can remove gum with WD-40 if nothing else works.
Test a hidden area first to ensure the WD-40 won’t stain or damage the carpet fibres. Then saturate the chewing gum with WD-40, especially the areas where gum meets carpet. (The smart straw will come in handy here!) Let it sit for 5–10 minutes.
Using a rag or soft-bristled brush, gently scrape and scrub the gum in one direction. This will pull the gum away from the fibres. Keep this up until all the gum is removed.
If you’re left with a gum stain, mix up a 1:1 solution of mild detergent and vinegar. Use an old toothbrush to work a small amount of the cleaning fluid into the gum stain directly. Then let it sit for 10–15 minutes.
Blot the stain remover and excess moisture using a clean rag afterwards. You can use a vacuum (make sure it’s carpet safe!) to fluff up the fibres when the carpet is dry.
Alternatively, if you have some handy, apply a solution of mineral oil and dry-cleaning solvent. Mix 1 part oil to 8 parts solvent, and use a sponge to apply the solution to the affected area. Remember to blot, not rub!
Keep dipping and blotting until the stain has lifted. Then use a fresh sponge dipped in clean water to rinse the area before letting it dry.
Clean and vacuum your carpet regularly to prevent dirt from building up in the fibres. You can also take your carpet out to shake the debris off once a day.
Keep the rest of your living room tidy – or let a professional cleaning company handle that for you! This will lessen the dirt that gets onto your rug or carpet in the long run.
And of course, while it’s useful to know how to get gum out of carpet, it’s better that you don’t have to. Avoid chewing gum around carpets and rugs, and gently educate your kids not to stick their chewy leftovers on anything – except paper towels for disposal!
The post How To Get Gum Out Of Carpet appeared first on Maid2Match.
]]>The post How To Get Red Wine Out Of Carpet appeared first on Maid2Match.
]]>But with a red wine carpet stain, you need to act fast. The sooner you treat the stain, the easier it’ll be to get red wine out of the carpet.
How to get red wine out of carpet? Start by blotting the excess wine with paper towels or a clean cloth. Keep going until no more wine transfers onto the paper towel. You can also sprinkle salt to absorb more liquid, or dilute the wine with water. Then make a baking soda paste and apply it directly to the stain. Let it dry before vacuuming the residue. If any stain remains, use a carpet stain remover.
Whether someone had an accident at a party or you were clumsy during “me time,” the trick to remove wine stains is to act fast and not panic. You can clean things up easy-peasy – then go back to sipping your Merlot in peace.
Before using any cleaning solution, you’ll need to blot the stain immediately using paper towels or clean cloths. Change to a fresh patch each time you dab at the mess. You can dilute the wine stain with cold water to make things easier, but be careful not to pour too much.
If you can’t work on removing red wine stains right away, the next best thing is to blot, then sprinkle some salt. The salt will absorb the liquid and limit the amount that seeps into the carpet fibres.
Also, before using any of these wine stain removers, test them on an inconspicuous area of your carpet! This way you can see whether it will damage the colour or the fibres.
Once you’ve finished blotting, mix a paste of 3 parts baking soda to one part warm water. Apply the paste directly onto the stained area and let it absorb the red wine. Once the paste has dried completely, vacuum up the residue.
Reapply as necessary until the stain has fully lifted.
After blotting up as much red wine as possible, pour club soda over the entire stain and let it soak overnight. Rinse the area with a clean sponge dipped in fresh water in the morning, then let the carpet dry.
White vinegar can neutralise colours and stains, so it might work to clean your carpet. Saturate the fibres with a mixture of white vinegar and dish soap. Continue blotting the area to lift the stain. Reapply as needed.
If your carpet is white or otherwise light-coloured, you can use hydrogen peroxide to lift the stain. Do not use this on coloured rugs as it could bleach the fibres.
After you’ve blotted and diluted the stain, mix one part dishwashing liquid to two parts hydrogen peroxide. Use a sponge to apply the solution to the affected area, then let it sit for 20–60 minutes (until you see the stain has lightened).
Blot it clean with a damp cloth or sponge to remove any soapy residue. Then repeat as necessary until the stain has lifted. Let the carpet dry completely, then vacuum to fluff up the fibres.
Sometimes we can’t clean a red wine stain immediately, but don’t worry. The carpet stain isn’t necessarily permanent!
If the red wine stain has dried and set into the carpet, you’ll need to “rehydrate” the stain with hot water. This will help “loosen” the dried red wine so it can be cleaned off. Try using baking soda, club soda, or white vinegar first to lift the stain.
Should none of those options work, you can use an oxygen-based cleaner or a commercial carpet stain remover. Be patient as you work.
When you’ve tried all the tips mentioned and still can’t remove the stain, it may be time to leave your carpet to a professional carpet cleaner.
How to get red wine out of carpet? Act ASAP, while you still have “wet” wine. Use an absorbent cloth so you lift as much wine as possible out of the carpet – the less wine sets in, the less cleaning you’ll need to do.
These tricks will also work for getting white wine out of carpet, although since it has no colour, you’ll have more leeway for cleaning.
If you’re hosting a party, leave the clean-up to professional home cleaners! Then you can use the leftover red wine to make some sangria, kick back, and relax in your clean home – just don’t spill it!
The post How To Get Red Wine Out Of Carpet appeared first on Maid2Match.
]]>The post How To Get Fake Tan Out Of Carpet appeared first on Maid2Match.
]]>How to get fake tan out of carpet? Don’t panic! Remove as much of the excess product as you can with a spoon or butter knife first. Then use a mixture of dish soap and warm water to gently scrub the stain. Blot as you clean, then let the carpet dry thoroughly.
Stain removal is straightforward, you just need to act ASAP. Treat and clean the stained area to remove fake tan stains – and be careful next time you use the product!
If your carpet is made of delicate material, such as pure wool, you may have to get the carpet professionally cleaned. It’s better to get professional carpet cleaning than risk damaging your carpet while doing a DIY job.
Always test your cleaning solution on an inconspicuous area of your carpet before treating the fake tanning stain. This is especially true if you’re using stronger cleaning products.
Avoid using cold water at the start since it could make the self-tanner set. You can use fresh cold water to rinse the carpet after you’ve cleaned it.
Also, be mindful of clear tan products! They may not stain immediately, but they’ll develop into colour and show up on fabric later on.
Fake tan and spray tan all “stain” your skin to give it that glowing colour, so yes, they’ll also stain your carpet and upholstery. Fortunately, the stain will come out if you treat it.
To remove fake tan stains, you’ll need:
Start by removing any residue from self-tanning products using a dull knife or spoon. Get as much as you can, as quickly as you can – the longer the product sits on the carpet, the more it will set. Avoid wiping or rubbing the product since this will push it further into the fibres.
Mix one teaspoon of dish soap into two cups of warm water. Dip your soft-bristled brush in the cleaning solution and gently scrub at the stain. Work from the outer edges going inward to prevent spreading.
As the stain foams up, blot the area using paper towels to start removing the stain. Keep scrubbing and blotting until none of the stain remains.
Once you’ve removed all the product, rinse the area with a sponge dipped in clean water. Keep blotting to absorb the moisture. Let the carpet air dry, then vacuum the fibres to lift them.
For older or stubborn fake tan stains, you can use hydrogen peroxide or oxygen-based bleach as stain remover. Be mindful when using these products; hydrogen peroxide will only work on light colours, since it can bleach darker dyes.
You cannot use oxygen-based bleach on wool carpets.
Mix one tablespoon of hydrogen peroxide with one tablespoon of warm water. Then dip a clean towel or rag into the solution and blot the fake tan stain. Use a clean sponge dipped in water to rinse the area, then let it air dry.
If you’re using oxygen bleach, follow the instructions on the package before applying it to the stained carpet.
Besides your carpet, you’ll need to regularly clean your upholstery and furniture – and act fast if anything gets stained. This applies not just to self-tanner, but also to other products and even foods. Of course, you can always leave the cleaning to the professionals.
Avoid stains by being mindful of where you use fake tan products. Avoid applying them in the living room or on your bed, and wait for the product to dry on your skin before sitting on any fabrics. Otherwise, enjoy your fresh and sun-kissed look – on your skin, not your rug!
The post How To Get Fake Tan Out Of Carpet appeared first on Maid2Match.
]]>The post How To Get Coffee Stains Out Of Carpet appeared first on Maid2Match.
]]>Now: don’t panic! A coffee stain isn’t the end of the world, and can easily be cleaned.
How to get a coffee stain out of carpet? For fresh coffee stains, you can use white vinegar, hydrogen peroxide, or baking soda. Dried coffee spills will need to be re-wet before you can effectively clean them.
(You might also have to clean coffee out of your clothes, too.)
Set another batch to brew, then roll up your sleeves! It’s time to learn how to get coffee out of carpet.
For fresh coffee spills, get into action immediately. Blot the coffee spill to absorb as much liquid as you can – the less coffee that soaks into the fibres, the better. Use paper towels or clean rags, and move to a fresh section once one part is soaked through.
Remember – to remove coffee stains, don’t scrub! You could damage the fibres and will just push the coffee into the carpet.
While blotting the stain, work from the outside-in to prevent spreading.
Once you’ve blotted the spilled coffee, it’s time to get the stains out of carpet. Before using any cleaning solution, test it on a small, inconspicuous area to make sure you won’t damage your carpet.
Check the material of your carpet and if it has any special cleaning instructions. In the case of delicate or specialised fibres, it may be better to hire professional carpet cleaners.
To remove a fresh coffee stain, use one of the following methods:
Make sure the cleaning solution you choose will not damage your carpet’s fibres.
After using your preferred stain remover, you can vacuum the carpet to fluff it up and lift the matted fibres.
Start by diluting the coffee stain with water. Pour small amounts onto the stain, then blot all the liquid using a cloth. Repeat until there is barely any coffee transfer.
Mix 1 tbsp of vinegar and 1 tbsp of liquid dish soap in 2 cups of warm water. Do not use dish soap or detergent that has a bleaching agent.
Dip a clean rag or sponge into the mixture, and dab it onto the stain, working outside in. Be careful not to oversaturate the carpet.
Use another clean cloth to blot some clean water onto the carpet to remove any residue. Then let the carpet air dry, or use a dry cloth.
NOTE: This method will also work to remove coffee stains from wool carpet!
You’ll want to be a bit more careful using this cleaning solution, so test first before applying! After you’ve blotted as much coffee as you’re able, mix 1 cup hydrogen peroxide with 1/2 tsp dish soap. Stir well.
Dip a clean cloth in the mixture and dab it onto the stained area. Let it sit for 10–15 minutes.
Use a fresh cloth dampened with clean water to rinse the area, then blot it dry.
Baking soda is also an excellent stain remover. Mix 1 part baking soda to 3 parts water, forming a paste. Apply the paste in a thin layer on the stained portion of the carpet and let it sit for 20 minutes.
Once the paste has absorbed the coffee and dried out, you can vacuum the residue. Repeat until the stain has lifted.
If you have dried coffee or an old coffee stain, don’t panic! It’s not necessarily permanent.
Start by rehydrating the stain using some warm water. Use a sponge to dab water onto the old coffee stains so that the residue loosens. This will also help lift some of the stain off the fibres.
Mix 1 tbsp vinegar, 1 tbsp dish soap, and 2 cups water together. Use a sponge to apply the solution to the old coffee spill, then rinse with a cloth dipped in clean water. Let the carpet dry fully.
If you’ve mixed milk in your coffee, you’ll need an enzyme laundry detergent or similar enzymatic cleaner. These will break down the proteins in milk and prevent any unpleasant odours from building up.
Rinse the affected area and blot dry before using another carpet stain remover.
A lot of us have our morning cup on the go, which means we’ve had the occasional accident in the car. Fortunately, removing coffee stains from a car carpet is similar to removing them from a regular carpet.
Unless your coffee spilled while you were parked, you’re not likely to get to the stain right away. If the coffee spill is fresh, blot it up right away; if it’s dried slightly, re-wet it with some warm water and blot it afterwards.
Mix 1 tbsp vinegar, 1 tbsp dish soap, and 2 cups of water. Apply the mixture to the stain using a clean rag or sponge, working until the stain has lifted. Then dab the area with water to rinse it before letting the carpet dry.
It’s important to know how to get a coffee stain out of carpet, alongside other tips and tricks (removing red wine, for instance). But it’s also important to keep your living room neat and tidy – even if you clean the stain, if the rest of the room is dirty, well… that won’t look good.
TIP: Make things easier for yourself and get professional home cleaners to take care of that for you!
The post How To Get Coffee Stains Out Of Carpet appeared first on Maid2Match.
]]>